Short Description And Assembly; Short Description; Assembly - Eberth Ak1-Rt1200 Bedienungsanleitung

Short description:

The roller tables AK1-RT1200 and 1800 are ideal for the execution of work-sha-
ring tasks.
The tables are adjustable in height. The close center distance of the rollers allows
a maximum load on the tables with simultaneous easy transport of the workpie-
ces. The rollers are galvanized.
The framework of the table is made of sheet steel and is coated. The roller tables
are easy to assemble for use.

Assembly:

• Place the top unit of the roller table with the bottom side up on a flat and
even surface.
• Mount the two pairs of legs using the hexagon bolts and nuts provided.
• First place one washer per screw at a time and slide the screw with washer
through the holes.
• Fix the screws with the nuts.
• Attach the legs at an angle of 90° to the upper unit of the roller table.
• Adjust the desired height by loosening the fixing knob and pulling out the
leg.
• Fix the leg again.
• Place the roller table on your feet.
EN V. 1.1

Short description and Assembly

9