GERATHERM cardio connect Gebrauchsanweisung Seite 46

Before You start
3. Keep the monitor at least 20 centimeters away from the human body (espe-
cially the head) when data transmission is proceeding after measurement.
4. To enable the data transmission function, this device shall be paired to an
appropriate BT mobile terminal.
Warning
about a wireless communication interference
The monitor operates in the unlicensed ISM band at 2.4 GHz. In case it is used
around the other wireless devices including microwave and wireless LAN,
which operate at the same frequency band as the monitor, there is a possibility
that interference occurs between the monitor and such other devices. If such
interference occurs, please stop the operation of other devices or relocate the
monitor before using it or do not use it around the other wireless devices.
list of compatible devices:
for ios devices:
The operating system must be iOS 13.0 or more.
for android devices:
The operating system must be Android 5.0 or more.
setting a user ID
There are 2 user ID available. User 1 and User 2, each with 199 memory spac-
es, are designed for 2 different people to save the measured values separately.
1. When the monitor is off, press the "start/stoP" button to display
the current user ID and flash. Press the "START/STOP" button again to
switch the user ID between the user 1 and user 2.
EN
2. After confirming the selected user ID, the User ID will not flash any-
more, and the monitor will enter the measurement automatically after 2
seconds.
user 1
user 2
40