Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9. Never use any extension cord or attachment not
recommended by the manufacturer.
10. Do not operate the charger if it has been subjected to shock
or damage. Take it to a qualified serviceman for repair.
11. Do not attempt to disassemble the charger or its power
adapters as it may result in a risk of electric shock or fire.
12. Unplug the charger from power supply before attempting any
cleaning. Use only a soft damp cloth. Do not use water,
detergents or alcohol.
13. Do not attempt to charge batteries with visible defects or
damage like rust, damaged isolation (wrapper), with dented or
pierced casing as this could cause a fire.
14. Do not attempt to charge frozen cells.
15. Intended for use with original power adapters only.
16. Do not use batteries with their + (positive) and - (negative)
ends (terminals) reversed.
17. Batteries can become hot during the charging process.
5. Power supply.
This charger should be used with original AC power input
cable or certified 12V DC adapter / cable. When the charger is
powered up, LCD display turns on.
6. Button controls.
SLOT – when charging more than one battery at once, switches
to next occupied battery slot (C1,C2,C3,C4, 1 and 2 – for 9V
batteries) with each button press. It is used to view detailed,
individual charging information for each rechargeable battery.
MODE – After inserting the batteries in the charger long press
(1-2s) the button to change the battery type. For the LiFePO
and Li-ion HV 3.85V you have to manually change the battery
type. The charger can't indentify those battery types by itself.
This is very important in case of charging the LiFePO
8
4
.
4
Werbung
