Salus Controls ERT50 UP Bedienungsanleitung Seite 103

GB
Floor Limit – When the Floor Limit temperature
reaches the programmed level, the thermostat
temporarily cuts off to protect the floor from
overheating. Only available if you have a floor
sensor.
If the floor sensor reaches the programmed
level or is not working properly, the following
messages will display:
If it reaches the programmed level :
Over Floor Limit
If it is disconnected or malfunctioning :
Check Floor Sensor
Offset – select the temperature offset from
-3.5 to 3.5 ºC to offset the room measurement
temperature
101