Mechanical; Installation - Genmitsu 4040 Reno Cnc Installationsanleitung

Mechanical

STEP 1 Installing X and Y axis Assemblies
What you need:
Y-axis Module (Left)
X-axis Module
1. Use (4) M5 x 25mm rounded hex screws to connect the Y-axis module (Left) and the X-axis module. Keep screws loosely installed
for now
M5 x 25 Rounded Hex Screw
Y-axis Module (Left)

Installation

Y-axis Module (Right)
(1) M5x18 Small Socket
Head Cap Screw
(7) M5x25 Rounded
Hex Screw
07