Disclaimer - Genmitsu 4040 Reno Cnc Installationsanleitung

Disclaimer

Please be careful when using your CNC machine. This machine is an electrical device with moving parts and dangerous working areas.
• Genmitsu CNC Machines are for Indoor Use Only.
• You must be 18 years or older to operate this machine, unless supervised by a knowledgeable adult familiar with the machine
• Wear proper Personal Protection Equipment (Safety Glasses etc.)
• Always place the CNC Machine on a stable surface.
• The 4040 Reno utilizes a high amp power supply. It is recommended that you do not plug the CNC Router into an extension cord,
or power strip as it may damage the machine.
• Ensure the Emergency Stop Button is easily accessible at all times.
• Never disassemble the Power Supply or Electrical Components. This will VOID the warranty.
• DO NOT TOUCH the machine spindle, or place any body part near the working area when the machine is operating. Serious
injury may occur.
• DO NOT leave children unsupervised with the CNC Machine even when it's not operating. Injury may occur.
• DO NOT leave the machine unattended while it's operating
• Ensure your CNC Machine is in a well-ventilated
02
area. Some Materials may discharge smoke or fumes during operation.