Genmitsu 4040 Reno CNC Installationsanleitung Seite 20

Mechanical Installation
STEP 6 Installing the Belt Tensioner
What you need:
Belt Tension Adjustment Kit (3) M3x12 Hex Socket Flat Head Cap Screw Isolation Column
1 Split belt tension adjustment kit
1.1 Remove the belt tension front screws and the black sheet metal block.
1 2 Remove the belt tension tightening screws on both sides, then remove the long screw from the bottom
I .3 Remove belt tension sliding block.
Tightening Screws Belt Tension Sliding Block
Sheet Metal Block
Screws Long Screw Belt Tension Holder
18