Z Probe Setup - Genmitsu 4040 Reno Cnc Installationsanleitung

Z Probe setup

Probe function introduction
I. Grblcontrol (Candle) Probe operating
Step I: Probe commands editing
Probe G code
G90G21G38 2Z-50FIOO
G92 Z14
GO Z25
Explanation
G21G91
G21G91
G38.2Z-20.17FIOO
GOZI
G38 2Z-2FO
G92Z20 1
G90
GOZ25
instructions
After editing
G21G91G38 2Z-20FIOO
GOZI
G38.2Z-2FIO
G92 Z20.17
GO Z25
metric, relative coordinates
metric, relative moves
probe 20.17 mm @ 100 mmpm
move up 1 mm (it's in relative, not absolute mode)
probe 2 mm $ 100 mmpm
my probe thickness, YMMV
back to absolute mode
retract off the probe
Probe Tool height
This assumes that the user would
position the probe, then jog the bit
5 or 10mm above it. With a PDF
this could be copied from the pdf,
pasted into Candle, and just the
probe thickness changed.
29