Werbung
Front Door Assembly:
1. Tools required – Torx Drive T-25, Torx Drive T-40, Torque wrench ( capable of
up to 9NM ) and compatible with Torx drive.
2. Remove the 1x top left M8x12mm gasket screw and using the M8 X 25mm
screws provided, insert two in the top positions (1x LH & 1x RH) prior to the
door verticals installation as shown below, leaving them slightly loose (not fully
torqued).
Alignement
Screws
Page 75
Werbung
