Werbung
Verfügbare Sprachen
Verfügbare Sprachen
the immediate loss of any war-
ranty claim.
The device may only be
•
opened by an authorised
electrician. Always contact
our service centre for repairs.
Switch the drive off, discon-
•
nect the device from the
power supply and allow the
device to cool off if you want
to clean, adjust, store the
device or to exchange an ac-
cessory part.
Handle the device with care
•
and keep it clean.
Store the device out of reach
•
of children.
Preparation
WARNING! Risk of injury due to un-
intentional start-up. Do not insert the plug
into the outlet until the device is fully pre-
pared for use.
Control elements
Familiarise yourself with the operating ele-
ments before using the device for the first
time.
Crevice nozzle
(Fig. A)
The crevice nozzle (13) is suitable for dry
vacuuming crevices, corners and radiat-
ors.
Upholstery nozzle
(Fig. A)
The upholstery nozzle (14) is suitable for
vacuuming upholstery and mattresses,
among other things.
Floor nozzle
(Fig. A)
Vacuuming smooth surfaces
1. Press the switch (3) on the floor nozzle
(4) with your foot so that the brush
strips of the floor nozzle (4) are folded
outwards.
Vacuuming carpets
1. Release the switch (3) on the floor
nozzle (4) with your foot so that the
brush strips of the floor nozzle (4) are
folded inwards.
Fitting accessories
(Fig. C/D/E)
1. Connect the suction hose (1) to the
connector (2). To do this, press the
sides of the end of the suction hose
(1).
2. Attach the telescopic tube (6) to the
other end of the handle (9).
3. Open the rear cover (10) and remove
the desired accessory (13/14).
4. Close the rear cover (10).
5. Attach the accessories (13/14/4) to
the telescopic tube (6).
6. Adjust the telescopic tube (6) to the de-
sired length while pulling the release
(7) downwards.
Filling the water filter
Notes
• Do not use the appliance without the
water filter.
• Make sure that all parts are inserted
correctly.
GB
MT
25
Werbung
