Silvercrest 320211 Bedienungsanleitung Seite 25

3) After it has boiled, pour this water away.
4) Rinse the kettle out with clear water.
5) Refill the appliance with water up to the MAX mark, and then bring it to the
boil. When done, pour this water away also.
6) Rinse the kettle out with clear water.
The appliance is now ready for use.
Boiling water
RISK – ELECTRICAL SHOCK!
► Never place the electrical base
potentially fatal risk!
WARNING – RISK OF INJURY!
► Always use freshly drawn water. Do not consume any water that has already
stood in the kettle for longer than one hour. Do not reboil water that has cooled
down. Always pour old water away. Microbes could have formed in it!
NOTE
► Always ensure that the ON/OFF switch
the mains plug is unplugged and the appliance is standing on the base
Otherwise the appliance could heat up unintentionally as soon as the
mains plug is plugged in again.
1) Lift the kettle off of the base when filling it!
2) Press the release button
NOTE
► When filling it, hold the kettle upright. This is the only way to read the
markings on the scale
3) Fill the jug up to no more than the MAX mark with water.
4) First close the lid, then place the kettle on the base
on the base
5) Now insert the plug into the mains power socket.
6) Push the ON/OFF switch
■ 22 │ GB │ IE
close to water – this would be a
and open the lid.
correctly.
.
downwards so that it engages.
is not pressed down when
, so that it sits securely
SWKK 2200 A1
.