Silvercrest SAS 7.4 LI C2 Kurzanleitung Seite 12

Charging
NOTE
► Ensure that the on/off switch
ance is switched off) before starting the charging process.
■ Place the handheld vacuum cleaner from above into the wall bracket
that the barrel plug
The charge indicator lamp
■ When charging is complete, which can take around 5 hours with fully dis-
charged batteries, the appliance automatically switches to a trickle charge
(maintenance function). The charge indicator lamp
Nevertheless, in order to avoid possible damage to the batteries, do not
leave the appliance permanently connected to the mains adapter
■ Do not recharge the batteries again until the handheld vacuum cleaner's
suction power becomes appreciably weaker and the charge indicator lamp
flashes green.
Operation
CAUTION!
► The suction opening must always be open and may not be blocked. Block-
ages lead to overheating and damage to the motor.
NOTICES
► Make certain that the dust filter
appliance.
► When vacuuming liquid, do not exceed the MAX marking in dirt container
1) Remove the handheld vacuum cleaner from the wall bracket
not using the wall bracket
2) If required, place the appropriate nozzle in the suction opening.
The crevice tool
accessory storage in the handle (fig. 3).
–
the crevice nozzle
–
the wet suction nozzle
SAS 7.4 LI C2
has been pushed back (and thus the appli-
6
slips into the socket on the handheld vacuum cleaner.
5
lights up red and the charging process begins.
7
is always inserted before using the
0
remove the barrel plug
3
and the wet suction nozzle
2
, to clean narrow and difficult to reach locations.
2
to vacuum up liquids.
1
lights up green.
7
4
or, if you are
3
from the socket.
5
are kept in the space-saving
1
GB │ IE
so
3
.
7
.
q
│ 9 ■