Inhaltsverzeichnis
Werbung
The duration that buttons are held determines the function they activate. Factory default is one second. Pressing
a button for less than one second activates one function. Pressing and holding the button in for longer than one
second activates another function.
The default one second release time can be changed to a shorter or longer duration, if desired.
To do this:
1. Press and hold the [ F ] button for one second to
enter the Menu mode again. The "
will appear on the display.
2. Rotate the [ DSP/SEL ] knob to select menu item
"KEYHOLD".
3. Press the [ DSP/SEL ] knob to enable adjustment of
this menu item. The "
4. Rotate the [ DSP/SEL ] knob to set the desired du-
ration time. Available selections are 0.5/1.0/1.5/
2.0 sec. (default value: 1.0 sec).
You may Press the [ RCL/HOME ] button to reset
the duration time to the factory default.
5. Press the [ DSP/SEL ] knob. The "
turns to appear continuously.
6. Press and hold the [ F ] button for one second to save
the new setting and return to normal operation.
FT-450D O
PERATION
K
D
EY
URATION
" icon
" icon will be blinking.
" icon re-
M
ANUAL
E
O
ASY
PERATION
S
ETTING
[ DSP/SEL ] knob
[ RCL/HOME ] button
[ F ] button
Page 17
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
