HIKMICRO MINI Schnellstartanleitung Seite 79

About this Manual
The Manual includes instructions for using and
managing the Product. Pictures, charts, images and all
other information hereinafter are for description and
explanation only. The information contained in the
Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the
latest version of this Manual at the HIKMICRO website
(www.hikmicrotech.com).
Please use this Manual with the guidance and
assistance of professionals trained in supporting the
Product.
Safety Instruction
These instructions are intended to ensure that user
can use the product correctly to avoid danger or
property loss.
Laws and Regulations
Use of the product must be in strict compliance with
the local electrical safety regulations.
Technical Support
https://www.hikmicrotech.com/en/contact-us.html
portal will help you as a HIKMICRO customer to get
the most out of your HIKMICRO products. The portal
gives you access to our support team, software and
documentation, service contacts, etc.
Maintenance
● If the product does not work properly, please contact
75
your dealer or the nearest service center. We shall not
English
assume any responsibility for problems caused by
unauthorized repair or maintenance.
● Wipe the device gently with a clean cloth and a small
quantity of ethanol, if necessary.
● If the equipment is used in a manner not specified
by the manufacturer, the protection provided by the
device may be impaired.
Using Environment
● Make sure the running environment meets the
requirement of the device. The operating temperature
shall be -10 °C to 50 °C (14 °F to 122 °F), and humidity
shall be 95% or less.
● Place the device in a dry and well-ventilated
environment.
● DO NOT expose the device to high electromagnetic
radiation or dusty environments.
● DO NOT aim the lens at the sun or any other bright
light.
● When any laser equipment is in use, make sure that
the device lens is not exposed to the laser beam, or it
may burn out.
● The pollution degree is 2.
Transportation
● Keep the device in original or similar packaging
while transporting it.
● Keep all wrappers after unpacking them for future
use. In case of any failure occurred, you need to return
the device to the factory with the original wrapper.