Thermalright AXP-100H Muscle Montageanleitung Seite 6

Installation
Step 1:
Step 1 : Backplate
Choose the platform
go through the Metal
Back Plate on the table. Put the four Washers
Step 2:
step 2 : 775 Back Plate cap
Note: When installing on a 775 platform,
first insen the Back Plate Cap into the opening
on the Back plate, make sure you have the Cap
facing downwards.
all other platforms go directly to Step 3.).
Step 4:
1
Step 4 : Place the Anchoring
Screw Nuts. use
the Anchoring Mount on to the Screw Nuts.
3
Instructions:
Installation
(775/1150/1151/1155/1156/1366)
Back Plate and the Mylar film from bottom
please
(Only for LGA775 platform,
4
2
Mount on the
the four M3L6 screws
Thermalright
o
you are in use.
towards
(for Intel) around the Screw
Step 3:
Step 3 : Install the four screw pillars.
Take one M3LIO screw and put one washer for
Intel around the screw
one of holes
towards top. Cap the screw pillar with the screw
nut included and then tighten up.
this installation
in a criss-cross
Step 5:
Step 5 : Applying Thermal Paste
to fix Apply the Chill Factor to the base of the Heatsink
and the surface of the CPU evenly.
1150
1151
1366
775 1155
1156
O o
O o
Make four M3LIO
top. And then place the Metal
Pillars.
4
1
2
3
pillar. Snap it through
around CPIJ socket from
Now repeat
for the other three screw pillars
pattem.
o
Screw Pillars
bottom