Thermalright AXP-100H Muscle Montageanleitung Seite 10

Installation
Step 1:
Step 1 : Backplate
Choose the platform (AMD) you are in use. Make four M3LIO Screw Pillars go through the Metal Back
Plate and the Mylar film from bottom
the four Washers (for AMD)
step 2:
Step 2 : Back Plate Cap
Note: When installing on an AMD platform,
please first insert the Back Plate Cap into the
opening on the Metal Back plate, make
you have the Cap facing downwards.
Step 4:
1
Step 4 : Place the Anchoring
Screw Nuts. Use the
the Anchoring Mount on to the Screw Nuts.
7
Instructions:
Installation
towards
around the Screw
sure
2
3
Mount on the
four M3L6 screws to fix
Thermalright
o
o
top. And then place the Metal
Pillars.
step 3:
1
Step 3 : Install the four screw pillars.
Take one M3L10 screw and put one washer for AMD
around the screw pillar. Snap it through one of holes
around CPU socket from bottom towards top. Cap
the screw pillar with the screw nut included and then
tighten up. Now repeat this installation for the other
three screw pillars in a criss-cross
Step 5:
Step 5 : Applying Thermal Paste
Apply the Chill Factor to the base of the Heatsink
and the surface of the CPU evenly.
AMD
o o
o o
o
Back Plate on the table.
4
2
3
pattem.
Put