How To Use - Panasonic CS-VZ12SKE Bedienungsanleitung

How to use

(Green)
To select operation mode
For your convenience
AUTO
• During operation mode selection the POWER indicator
blinks.
• Unit selects operation mode every 30 minutes according
to temperature setting, operation mode, outdoor and room
temperature.
To enjoy cool air
COOL
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during COOL mode.
To dehumidify the environment
DRY
• Unit operates at low fan speed to give a gentle cooling
operation.
To enjoy warm air
HEAT
• Unit takes a while to warm up, the POWER indicator blinks
during this period.
• Unit removes ice/frost formed on outdoor heat-exchanger by
following 2 types of operation.
1) Deice with heating operation (HEAT CHARGE Operation).
Unit has a heat absorbing device which accumulates
heat generated by outdoor unit and electric heater while
performing the heating operation to remove ice/frost
formed on outdoor unit for maximum 6 minutes.
During this operation, the discharge temperature and
fan speed may be lowered when outdoor temperature
is low, or the room is not warmed up suffi ciently, or set
temperature is high.
2) Deice without heating operation (Reversing/4-way Valve
activating).
Unit stops heating operation to remove large amount
of ice/frost formed on outdoor unit for maximum 12
minutes.
During this operation, the power indicator lights on and
the vertical airfl ow direction louver is left open.
The heating operation resumes once this operation is
completed.
Stop the operation
OFF
Auto OFF/ON button
AUTO
O/I
8
(Orange) (Green)
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• Press the button again to turn off.
(Blue)
Remote control display (the Backlight will be lit
whenever pressing any button)
CLOSE
(Green)
Indicator
POWER TIMER +8/10°C nanoe/ODOR CLEANUP
Human activity sensor
Sunlight sensor and
remote control receiver
COOL DRY HEAT
AUTO
TEMP OFF
+8/10°C
INFO
HEAT