Cleaning Instructions - Panasonic CS-VZ12SKE Bedienungsanleitung

Cleaning instructions

To ensure optimal performance of the unit, cleaning has
to be carried out at regular intervals. Dirty unit may cause
malfunction. Please consult authorised dealer.
• Switch off the power supply and unplug before cleaning.
• Do not touch the aluminium fi n, sharp parts may cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household detergent.
• Do not use water hotter than 40°C.
Indoor unit
Wipe the unit gently with a soft, dry cloth.
Human activity sensor
Do not hit or violently press or poke it with a sharp object.
This can lead to damage and malfunction.
Outdoor unit
Clear debris that surround the unit.
Clear any blockage from drain pipe.
Front panel
• Raise and pull to remove the front panel.
• Use dry or soft cloth.
Remove the front panel
2
1 Raise
Close it securely
Arm
1 Insert at both sides
2 Close down
Air Purifi cation Filter
• Do not wash/rinse the fi lter with water.
• Replace the fi lter every 2 years.
Part no.: CZ-SA33P
Pull out
Air Purifi cation Filter
Indoor unit
Air Purifi cation Filter
(inside the air fi lter)
Front panel
Display cover
Air fi lters
<How to open horizontal louvers>
Pressing ECONAVI button for 5 seconds, and display shows "OPEN
LOUVER", the louvers will be open.
To close them, press OFF button.
Air fi lters
Every 2 weeks
• Wash/rinse the fi lters gently with water to
avoid damage to the fi lter surface.
• Dry the fi lters thoroughly under shade, away from fi re or
direct sunlight.
Remove air fi lter
Attach air fi lter
Rail (Orange)
Ditch
For seasonal inspection after extended non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL/HEAT operation.
After 15 minutes of operation, it is normal to have the
following temperature difference between air inlet and air
outlet vents:
COOL: ≥ 8°C HEAT: ≥ 14°C
For extended non-use
• Activate HEAT mode for 2~3 hours to remove moisture left
in the internal parts thoroughly to prevent mould growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
<How to open the front panel>
Pull the open/close part, then open
with hands.
<How to open the display cover>
Put your fi ngers on the tabs on the
display cover, then open it downward.
13