Panasonic CS-VZ12SKE Bedienungsanleitung Seite 9

To check HEAT CHARGE level and
INFO
error code
To check HEAT CHARGE level.
• Press during HEAT mode to retrieve HEAT CHARGE level of
heat stored in heat absorbing device.
• HEAT CHARGE level: 0 ~ 4 (max.).
• "_ _" will be displayed unless during heating operation.
To check error code.
• Press to retrieve error code when the unit stops and the
timer indicator blinks.
If the signal transmission is failed, "PRESS AGAIN" is
displayed.
To use maintenance
+8/10°C
HEAT heating
• Maintain indoor temperature at 8/10°C. Fan switches to high
fan speed automatically.
• This operation overwrite the operation mode and could be
cancelled by pressing AUTO, HEAT, COOL or DRY mode.
• Defrost operation at outdoor unit will
result in sudden cold air from indoor unit.
Eliminate cold air with heat mode.
Auto Restart Control
• If power is resumed after a power failure, the operation will
restart automatically after a period of time with previous
operation mode and airfl ow direction.
• This control is not applicable when TIMER is set.
Note
AUTO
ECONAVI nanoe
COMFORT
, ,
SLEEP
• Can be activated in all modes and can be cancelled by
pressing the respective button again.
10°C
TEMP
8°C
POWERFUL QUIET
, , ,
See "To learn more..." for details.
To set the timer (daily timer)
Dual setting of ON and OFF timers are available to turn
ON or OFF the unit at different preset time.
1 2 3
ON ON SET
OFF CANCEL
RESET RESET
CLOCK CLOCK MENU MENU
1 Select ON or OFF timer
• Each time pressed:
Cancel
2 Set the time
3 Confi rm
TIMER
• Example of application at living room:
Morning: ON TIMER at 07:00 (Wake up)
OFF TIMER at 08:00 (Out for work)
Evening: ON TIMER at 17:00 (Back home)
OFF TIMER at 22:00 (Sleep)
• To cancel ON or OFF timer, press
select respective or then press
• If timer is cancelled manually or due to power failure,
you can restore the timer again by pressing
OFF
to select respective or then press
• The nearest timer setting will be displayed and will
activate in sequence.
• When ON Timer is set, the unit may start earlier (up
to 50 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Quick guide.
+8/10°C AUTO
ECONAVI
HEAT COMFORT
, ,
• Cannot be selected at the same time.
PRE
HEATING
• Can be combined with AUTO or HEAT mode only.
OPEN
Example:
OFF at 8:00
OFF
SET
ON OFF
or
CANCEL
.
ON
SET
.
POWERFUL QUIET
, ,
to
or
9