Herunterladen Inhalt Inhalt Diese Seite drucken

How To Use - Panasonic CS-Z25UD3EAW Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für CS-Z25UD3EAW:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

How to use

Remote control display
OFF / ON
TIMER/CLOCK
MODE
UP
SELECT
OFF/ON
DOWN
SET
CLOCK
CANCEL
Press and hold
for approximately
10 seconds to show
temperature setting
in °C or °F.
Not applicable
FAN SPEED
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
MODE
To select operation mode
AUTO - For your convenience
HEAT - To enjoy warm air
COOL - To enjoy cool air
DRY - To dehumidify the environment
QUIET/
To switch between quiet &
POWERFUL
powerful
QUIET
POWERFUL
QUIET: To enjoy quiet operation
• This operation reduces airflow noise.
16
ACXF55-17690_book1.indb 16
ACXF55-17690_book1.indb 16
FAN SPEED
MODE
QUIET/
TEMP
AIR SWING
POWERFUL
AC
RC
CHECK
RESET
Press to restore the
remote control to
previous setting.
Not used in normal
operations.
NORMAL
POWERFUL: To reach temperature quickly
• This operation stops automatically after 20
minutes.
• To eliminates the POWERFUL indicator after 20
minutes operation, press
Can be activated in all modes and can be
cancelled by pressing the respective button again.
Daily timer setting
To turn ON or OFF the unit at a preset time.
TIMER/CLOCK
MODE
UP
1
OFF/ON
DOWN
2
CLOCK
MODE
1 Press TIMER
to enter timer mode
• Press once to change the display from clock
to timer or vice-versa.
• Press for 4 seconds to change the display
from daily timer to weekly timer or vice-
versa.
2 Select ON or OFF timer Example:
3 Set the time
4 Confirm
CANCEL
• To cancel, press
.
• When ON timer is set, the unit may start early
before the actual set time in order to achieve
the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set.
• The timer closest to the current time will be
activated first.
• If timer is cancelled manually or due to power
failure, you can restore the previous setting by
SET
pressing
.
QUIET/
POWERFUL
button again.
SELECT
3
SET
4
CANCEL
OFF at 22:00
OFF/ON
UP
DOWN
SET
12/7/2017 5:07:02 PM
12/7/2017 5:07:02 PM

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis