How To Use - Panasonic CS-BE25TKE Bedienungsanleitung

How to use

Indicator
FAN SPEED
Not used Press to restore
in normal the remote
operations. control to default
setting.
To maximise comfort while sleeping
This operation provides you with a comfortable environment while sleeping. It will
automatically adjust the sleep pattern temperature during the activation period. The indoor
unit indicator will dim when this operation is activated. This is not applicable if the indicator
brightness has been manually dimmed.
SLEEP
This operation is incorporated with the
activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9
hours).
(Green)
POWER
• Do not adjust the fl ap by hand.
(Orange)
TIMER
• For lateral direction, it is manually
• For AUTO, the indoor fan speed is automatically
• To have low noise priority operation, select the
POWERFUL:
To reach the preset temperature quickly
• This operation stops automatically after 20 minutes.
QUIET:
To enjoy quiet operation
• This operation reduces airfl ow noise.
(Cancel)
To adjust airfl ow direction To adjust airfl ow direction
Upper direction
AIR SWING
adjustable as shown.
To adjust fan speed
AUTO
FAN
adjusted according to the operation mode.
lowest fan speed ( ).
To switch between powerful/quiet
• This operation can be set together with timer.
Sleep operation has the priority over OFF
timer.
• This operation can be cancelled by pressing
the respective button when the sleep timer
reaches 0.0h.
7