Loosen the screws from the two hinges (A), carefully removing the door (B) from
4
them. Put the door (B) in a safe place. Next open the technical compartment (C)
by pressing lightly on the door.
B
E
N
G
Insert the electrical cable coming from the wall into the rear drill hole.
5
A
C
A
26
Regulate the bracket with a
6.1
screwdriver.
Insert the base stands of Château
6.3
inside the brackets.
Adjust the block in the bracket before
6.2
fitting Château into the wall.
Check that the Château mirror is
6.4
level.
27
E
N
G