Modster CHARGER 100 Bedienungsanleitung Seite 34

•l SPECIAL FEATURES
Data Store/Load
The charger can store up to 10 different charge/discharge
your convenience. You can keep the data pertaining to program setting
of the battery of continuous
these data at any time without any special program
Terminal Voltage
The charger allows user to change the end voltage
LiPo Battery Meter
The user can check battery's total voltage, the highest voltage, the
lowest voltage and each cel 's voltage.
Maximum Safety
Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge
termination program
detection. When the battery's voltage exceeds
process will be terminated automatically
Automatic Charging
You can set up the upper limit of the charging current when charging
your NiMH or NiCd battery, it is useful for the NiMH battery of low
impedance and capacity in the 'AUTO' charging
Capacity Limit
The charging capacity
multiplied by time. If the charging capacity exceeds the limit, the
process will be terminated
value.
Temperature
The battery's internal chemical
the battery to rise. If the temperature limit is reached, the process will
be terminated.
*This function
which is not included in the package.
Processing Time Limit:
You can also limit the maximum
defect
charging
Control(TVC)
based on the principle
Current
is always calculated
automatically
Threshold*
is available by connecting
or discharging.
of the Delta-peak
Limit
as the charging
when you set the maximum
reaction will cause the temperature
optional
process time to avoid any possible
profiles for
Users can call out
setting.
voltage
the threshold, the
mode.
current
temperature
of
probe,