Geberit AQUACLEAN MERA Montageanleitung Seite 41

Testing the spray functions
O
For the following test steps, weight must be
applied to the WC seat to simulate a user.
The LED on the lateral control panel lights
up blue during this.
1
Test the anal shower
The device performs nozzle cleaning.
The spray arm extends.
The anal shower begins with both nozzle
openings active.
After completing the shower cycle, the
spray arm retracts.
The device performs nozzle cleaning,
03-2CQ2
function.
O
After a complete shower cycle, the device
will require around 2 minutes to bring the
storage water heater back to shower water
temperature. During this time, hot water will
only be available from the rear spray nozzle,
2
Test shower water temperature,
o
The shower water is noticeably heated
over the entire shower cycle.
3
Test adjustability of spray intensity.
During a shower cycle, the spray
intensity can be altered,
EN
BGEBERIT 41