Herunterladen Diese Seite drucken

BWT AQA drink Pro 20 Installations- Und Bedienungsanleitung Seite 18

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3. Use and constructio n
3.1 Use for the intended purpose
This BWT AQA drink Pro 20 water dispenser
may only be fed with cold water with drinking
water quality. Any other use is regarded as not in
accordance with the intended purpose. The AQA
drink Pro 20 is a water dispenser which is connected
directly to the drinking water supply. Unlimited
access to clean drinking water is thus available
(depending on the fi lter capacity). Ideally, the
water dispenser can be combined with BWT
fi lter technology for perfect enjoyment thanks to
enrichment with magnesium.
3.2 Construction and function of the AQA drink
Pro 20
The AQA drink Pro 20 water dispenser offers three
different water options:
CAS: cooled and still, room temperature and
still, cooled with CO 2
Fig. 1 shows the AQA drink Pro 20 water dispenser.
The following elements are included: on the front:
1
LED indicators
2
Selection buttons
3
Drip tray
4
Water outlet
1
3
Abb. 1: AQA drink Pro 20 Front ansicht (CAS)
Fig. 1: Front view of the AQA drink Pro 20 (CAS)
17
After the water dispenser has been installed (Chapter
5), the required type of water can be chosen. Place a
glass on the grid of the drip tray under the water out-
let and choose the required type of drinking water by
pressing one of the selection buttons. Water dispens-
ing and UV sterilization start immediately. The control
panel for the CAS device is shown in Fig. 2
Fig. 2: Control panel of the AQA drink Pro 20 CAS
Abb. 2: Bedienfeld AQA drink Pro 20 CAS
Explanation of selection buttons
Cooled water, still
Room temperature water, still
carbonated water with CO
Explanation of the LED indicators
2
LED indicator COLD is on when the cold water
function is on: cooled water is available.
LED indicator CO 2 is on when the CO 2 function
is on: carbonated water (with CO 2 ) is available.
4
LED indicator UV is on when the UV lamp is on:
UV lamp is functional.
UV LED indicator fl ashes when the UV lamp is
not working or is not connected.
Note!
The LED lighting at the water outlet fl ashes when the
wastewater tank (available as an option with the cabine)
is full or leak protection is activated.
2

Werbung

loading