Setting The Clock; Settings; On/Off; Selecting A Function - Whirlpool AKZ 6240 IX Bedienungs- Und Wartungsanleitung

EN 12

1.1 SETTING THE CLOCK

When the oven is switched ON for the first time, the
clock must be set.
Set hours.
Confirm.
Set minutes.
Confirm.
NOTE: To change the time afterwards when the oven
is switched OFF, hold
repeat the operations above. After a power failure the
clock needs to be re-set.

1.2 SETTINGS

If necessary the temperature units and electrical
power settings can be changed from the default
values (C° and 16A).
Hold for at least 5 seconds
switched OFF (see section 1.3).
Select C° or F°.
Confirm value.
Select power (16A or 13A).
Confirm value.
NOTE: After confirming settings, it may be necessary
to re-set the clock.
for at least 1 second and
when the oven is

1.3 ON/OFF

When the appliance is turned off only the 24 hour
clock is displayed.
Switch the oven ON (hold for ½ sec).
When the oven is switched ON, both displays are
active.
The knob and all touch keys are fully functional.
NOTE: Always ends an active cooking cycle.

2 SELECTING A FUNCTION

In the left display, choose from 6 different cooking
cycles and 12 further functions. For descriptions, see
the table on page 17 and page 18.
Switch the oven ON.
Select the main function.
Confirm selection.
Proceed as indicated in the "quick start" section
(section 3), to run the cooking function
immediately or to go through the mode-setting
wizard as indicated in sections 4, 5, and 6.
NOTE: For 6 Sense or
th
the relevant section (7, 8) on page 15.
USING THE OVEN
Special functions see