Werbung
Verfügbare Sprachen
Verfügbare Sprachen
After use
1) Allow the appliance to cool down.
2) Remove the pad 6/o.
3) Remove the water tank 8 from the appliance and empty it.
4) Pull the upper cable hook z out a little and turn it back upwards.
Wind the cable back around the two cable hooks z/i.
Fix the end of the power cable using the cable clip located on the cable.
Cleaning and care
RISK OF ELECTRIC SHOCK!
►
Always remove the mains power plug before cleaning the appliance!
WARNING! RISK OF INJURY!
►
Allow the appliance to cool down before cleaning it. Risk of burns!
CAUTION! PROPERTY DAMAGE
►
When cleaning the surfaces use neither abrasive or chemical cleaners,
nor sharp or scratchy objects.
Empty the water tank 8 after every use.
■
After each use, remove the pad 6/o from the steam foot 5 and wash it out.
■
Note the following washing instructions when you wash the pad 6/o in
■
the washing machine:
■
If necessary, wipe the appliance with a damp cloth. For stubborn soiling use
a mild detergent on the cloth.
│
GB │ IE │ NI │ CY
■
12
Wash at max. 60°C
Do not bleach
Do not tumble dry
Do not iron
SDM 1500 D2
Werbung
