Pin / Puk; Troubleshooting - Touratech Connect Bedienungsanleitung

5.4

PIN / PUK

In addition to the encrypted Bluetooth@ LE connection,
number (PIN) and Personal unlocking key (PUK) is used. You can define PIN and PUK
independently with up to 8 numbers. These should not be forgotten!
FORGOT PIN: Entering the PUK instead of the PIN will reset the device. A new device
registration is then possible.
FORGOT PUK: As long as the PIN is known, the device can be used without restrictions.
FORGOT PIN and PUK: If both PIN and PUK are forgotten, the device can no longer be
used. Reactivation by the manufacturer is also not possible.

6. Troubleshooting

Connection problems:
in the Bluetooth settings menu of your smartphone.
connection within the Touratech Connect application.
attempts are necessary.
Unsuccessful scan: The ignition of the vehicle must be switched on and the device
must be fully plugged in. The radio system must not be surrounded by a closed metal
cover. Make sure that there is not already a connection
that there is not already a faulty connection to your device. To do this, deactivate and
reactivate the Bluetooth of your smartphone
scanning and establishing
Disconnections: If the connection is frequently
should be adiusted accordingly to optimize the signal strength. (see 5.1) The connect
on cable of the dongle should ideally point away from the display device.
The dongle must not be surrounded
Display function generally does not work: In this case the function accesses data that
your vehicle does not provide. The selection of such functions is possible if the vehicle
was selected incorrectly or the selection of the available optional extras is incorrect.
PIN:
PUK:
Delete outdated pairing information of the dongle (if available)
the connection.
by a closed metal cover.
TOURATECH
a Personal indentification
Then try to re-establish
In some cases two connection
to another
and use the Touratech application
interrupted during use, the dongle
NEUE IDEEN FÜRS MOTORRAD
the
device. Make sure
for
15