Product Notes - Touratech Connect Bedienungsanleitung

NEUE IDEEN FÜRS MOTORRAD
TOURATECH
3. Product notes
Connection cable
A vehicle-specific connection cable is required for the vehicle installation. The connection
cable is part of the respective scope of delivery. Use this connection cable exclusively for
connecting the TOURATECH Connect
damage to the vehicle or equipment.
Note vehicle approval/certification
Approved for vehicle use according to UN-ECE component approval.
PIN/PUK
PIN and PUK are used to restrict access to unauthorized third parties. PIN and PUK must
not be forgotten simultaneously. Otherwise, the device can no longer be used. The PIN is
required to log in or to Use the device. The PUK is required to reset the device to factory
settings.
Limitation of use
The APP does not require a permanent Internet or telephone network connection. The
operation is therefore not subiect to any usage restrictions. The product is designed for
complete offline use. Only the Bluetooth connection between dongle and mobile device
must not be interrupted.
Vehicle restriction
The display functions of the application
vehicle. Accordingly, the functions differ depending on the vehicle model and also special
equipment. Both vehicle model and optional
application.
Change of motorcycle
When changing a motorcycle,
the software, i.e. that the vehicle can be selected within the application. Furthermore, you
can find out on our product website whether the existing connection cable can still be
used.
Change of user or change of the smartphone
The dongle only stores the pairing information for a single mobile device (smartphone). If
a new mobile end device is to be connected, this can be done by a repeated connection
attempt. At least two connection attempts are required for the dongle to overwrite the
pairing information of the last used device.
If, on the other hand, the user or the connected mobile device is changed frequently, it
must be ensured that the mobile device (smartphone) does not have outdated pairing
information regarding the dongle. The pairing information can be deleted in the Bluetooth
settings of the respective smartphone operating system. Thereupon a new connection is
possible. As described above, several connection attempts are required to delete the
outdated pairing information on the dongle side.
12
Dongle.
Display functions
it is important
Failure to do so may result in serious
depend on the available sensor values of the
equipment can be selected within the
to make sure that the vehicle is supported by