Service Data - Electrolux EOC3410 Benutzerinformation

Problem
The display shows "F102".
The display shows an error
code that is not in this ta-
ble.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".

10.2 Service data

If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on
Possible cause
• You did not fully close
the door.
• The door lock is defec-
tive.
There is an electrical fault.
The demo mode is activa-
ted.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
ENGLISH
Remedy
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows
"F102" again, contact
the Customer Care De-
partment.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
1. Deactivate the oven.
2. Press and hold the but-
ton .
3. When an acoustic sig-
nal sounds, turn the
knob for the oven func-
tions clockwise to the
first function. "Demo"
flashes in the display.
4. Turn the knob for the
oven functions to the off
position.
5. Release the button
6. Turn the knob for the
temperature clockwise
and hold it for three
seconds. The acoustic
signal sounds three
times. The demo mode
is deactivated.
25
.