Replacement Parts - Panasonic ER-GC20 Bedienungsanleitung

5. Brush any hair trimmings out from
between the stationary blade and the
moving blade while pressing down
the cleaning lever to raise the moving
blade.
This clipper can be rinsed with the blades removed.
Warning
Disconnect the power cord from the clipper before cleaning
it in water to prevent electric shock.
Lubrication
Apply the oil to the clipper before and after each use.
Apply a drop of the oil to the points indicated by the arrows.
Lubricating using the sliding
plate for maintenance
6
Lubricating with the blades
removed
Remounting the blade
Fit the mounting hook into the
blade mounting on the clipper
and then push in until you hear
a click.
► Blade life
Blade life will vary according to the frequency and length of use. It
is expected to be about 2 years when using the clipper twice a
month for 20 minutes each time. If cutting efficiency is reduced
despite proper maintenance, change the blades.
Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ER‑GC20
Specifications
See the name plate on the AC adaptor.
Power source
(Automatic voltage conversion)
Motor voltage
5. V
Airborne Acoustical
60 (dB (A) re 1 pW)
Noise
This product is intended for household use only.
Please read "Information on Disposal for Users of Waste Electrical
& Electronic Equipment (private households)" on page 90.
Blade block WER9605