Technical Data - Mpm Mod-72 Bedienungsanleitung

EN
TROUBLESHOOTING
PROBLEM
The vacuum cleaner is not
working
Low suction power
The rotating electro-brush
roll stopped working
The charging indicator is not
illuminated

TECHNICAL DATA

Technical specifications are given on the product nameplate.
CAUTION! MPM agd S.A. reserves the right to technical changes.
Proper disposal of the product (waste electrical and electronic
equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be
disposed with other type of municipal waste. Used equipment may have a negative impact on the
environment and health of people due to potentially containing hazardous substances, mixtures and
components. Mixing electric waste with other types of waste or disassembling those in an unprofes-
sional manner may cause a release of substances that are hazardous to the environment and health.
Used equipment should be handed-over to a point for collection of electric waste. In order to obtain detailed
information regarding the electric waste collection points, the user should contact the municipal point of elec-
tric waste collection or used equipment processing department.
Proper removal of product (batteries and//or accumulators)
The icon with a crossed out trash can indicates that accumulators/batteries are subject to selective
collection and recycling. Pursuant to Directive 2006/66/WE, batteries and/or accumulators must not
be thrown away together with other waste coming from households after their service life comes to
an end. To prevent possible damage to the environment or human health resulting from uncontrolled
waste disposal, accumulators/batteries should be collected, disposed of or recycled in accordance with appli-
cable laws. A used battery should be placed in a special container at separate collection points for this type of
waste.
40
CAUSE
Battery discharged
Charging process in progress
Clogged pipe or brush
Dust container full
Dirty dust filters
Electric brush roll jammed
The charging cable is
damaged
Power is not supplied to the
charging station.
SOLUTION
Charge the battery
Wait until the charging
process is completed
Remove the cause of clogging
Empty the dust container
Clean the filters
Clean/unblock the roller of
the electro-brush
Return the product to the
retailer or service centre in
order to have it repaired.
Check whether the power
supply is connected to the
mains socket.
charge r