Using The Vacuum Cleaner - Mpm Mod-72 Bedienungsanleitung

EN
2. After charging is completed, the LED display (5) will display "100" and the three lights on the
battery will glow steadily.
3. Disconnect the charger (24) from the mains supply and the charger cable from the socket in
the holder (1).

USING THE VACUUM CLEANER

1. Make sure the vacuum cleaner is properly assembled and the battery is charged.
2. Connect the relevant equipment:
- multifunctional electro-brush with illumination (17) - two interchangeable rollers: a soft
bristle roller and a roller for all types of hard and smooth surfaces, LEDs illuminate the surface
to be cleaned for perfect vacuuming.
- crevice attachment (18) – vacuuming of corners, spaces under the furniture and anywhere
where access to free use of other accessories is limited.
- furniture/blinds attachment (19) – dedicated to vacuuming couches, sofas, armchairs, car
upholstery, as well as removing dust from shelves, books, lampshades, frames, decorations,
curtains, etc. Brush hairs additionally detach extremely stubborn dirt from the surface to
be cleaned.
Depending on the needs, connect the equipment to the suction pipe or directly to the engine
module (3).
1. Start the vacuum cleaner with the ON/
OFF button (2).
2. During the operation of the appliance,
select the optimal suction power with the
suction force adjustment touch panel (6).
3. Keep the dust container level under regu-
lar control (8). The overfilling of the dust
container will result in the weakening of
the suction power and the fast soiling of
the filters.
CAUTION! The container full indicator
(5e) will appear on the display if the pipe is clogged or the dust container is full. It is
then necessary to empty the dust container or remove the cause of the clogged pipe.
4. After the vacuuming is finished, switch off the vacuum cleaner with a ON/OFF button (2).
Use the free-standing station (20) and put the vacuum
cleaner away.
The vacuum cleaner is provided with a flexible alumini-
um pipe (14) in order to get to hard-to-reach areas.
1. Place the vacuum cleaner on the floor, holding the motor
module holder (3) with one hand.
2. Press the key located in the rear part of the aluminium
pipe (14) with your other hand. The pipe will bend auto-
matically which will facilitate the vacuuming of hard-to-
reach places, e.g. floor under the couch.
3. In order to fold back the pipe, raise the vacuum clean-
er. The aluminium pipe will lock itself automatically in the
straight position.
38