Beurer FC 90 Gebrauchsanweisung Seite 12

GETTING TO KNOW YOUR INSTRUMENT
Thanks to its multifunctional ionic technology, the FC 90 Pureo Ionic Skin Care is ideal for cleansing
and anti-aging facial treatments. The treatment head can be charged with either positive or negative
ions. Electrochemical reactions cause these charged ions to get under the skin's surface into the
deeper layers of the skin or to move from the deeper layers of the skin to the skin's surface.
Desincrustation cleansing:
The negatively charged components in the cleansing milk are channelled deep into the skin with the
aid of the negative ions. There, they loosen impurities, which are then drawn to the skin's surface by
the positive charge of the treatment head.
Anti-aging by iontophoresis:
If the treatment head is negatively charged, the negatively charged anti-aging agents in the Advanced
Hydro Lift Cream are pushed away from the treatment head and carried deep into the skin. There, the
anti-aging agents have the best possible e ect.
Cool and heat function:
The FC 90 Pureo Ionic Skin Care also has a cool and heat function. The heat function relaxes the
skin on the face and promotes circulation. It leaves your skin feeling smooth. With the cool function,
swellings on the face can be reduced, pores can be tightened and the skin elasticity can be improved.
1. INCLUDED IN DELIVERY
Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents
are present. Before use, ensure that there is no visible damage to the device or accessories and that
all packaging material has been removed. If you have any doubts, do not use the device and contact
your retailer or the specified Customer Service address.
• 1 FC 90 Pureo Ionic Skin Care
• 1 Mains adapter
• 1 Intensive Ceansing Milk (30 ml)
• 1 Advanced Hydro Lift Cream (15 ml)
• 1 Instructions for use
2. SIGNS AND SYMBOLS
The following symbols are used on the device, in these instructions for use, on the packaging and on
the type plate for the device:
Warning
Warning instruction indicating a risk
of injury or damage to health
Product information
Note on important information
Marking to identify the packaging
material. A = Material code,
B
B = Material number: 1-7 = Plastics,
A 20-22 = Paper and cardboard
Disposal in accordance with the
Waste Electrical and Electronic
Equipment EC Directive – WEEE
Read the instructions
Separate the packaging elements
and dispose of them in accordance
with local regulations.
Separate the product and pa-
ckaging elements and dispose
of them in accordance with local
regulations.
CE labelling
This product satisfies the require-
ments of the applicable European
and national directives.
12