VANTRUE Nexus 2X Bedienungsanleitung Seite 8

1.3 Installation Camera and Setup
Please power on and turn on the camera, then
complete the camera menu settings, and finally install
the camera on the front windshield of your car.
Power on: Connect one end of the original USB
power adapter to the power supply, and plug the
other end into the power connector of the N2X GPS
mount to test if the camera can power on normally.
Settings: After you use it for the first time, or after
each firmware update or after restoring the factory
settings, you need to reset some basic settings such
as date and time, language and region.
1440P +1080P 30FPS
00:00:37
12-01-2024 AM 10:09:07
Installation completed: Ensure that the dash camera
is properly mounted on the vehicle's windshield and
does not block the driver's view, and that the front
camera is shooting in the direction of the road.
45
MP/H
- 3 -
Record Setup
EN