VANTRUE Nexus 2X Bedienungsanleitung Seite 25

1440P +1080P 30FPS
EN
00:00:37
12-01-2024 AM 10:09:07
Low-light Night Vision On
Collision detection in parking
This function allows you to adjust the startup mode of
collision detection. In power saving mode, the dash
cam will turn off and then turn on to record after the
trigger; in fast start mode, the dash cam will be in
standby mode and start recording immediately after
the trigger.
Parking Monitor Settings
Detection Lens Setting
Low Light Night Vision in Parkin...
Collision Detection in Parking M...
The detection range of the front camera and rear
camera can be set on the N2X dash cam, and the set
range can be adjusted up and down as well as left
and right.
Parking Monitor Settings
Low Light Night Vision in Parkin...
Collision Detection in Parking M...
Motion Detection Area
1440P +1080P 30FPS
45
00:00:37
MP/H
12-01-2024 AM 10:09:07
Low-light Night Vision Off
Collision Detection in Parking Mode
Power Saving Mode
Quick Start Mode
Front Area Detection
- 20 -
45
MP/H