Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Press the On/Off switch (1) on
the handle.
The motor will work, the oper-
ating light (5) and the control
light (11) will illuminate, the
brush in the floor nozzle will
rotate and the appliance will
create suction.
3. Push and pull the appliance
over the floor and into the
corners.
4. After vacuuming, push the
On/Off button (1) on the han-
dle.
The motor will stop working,
the operating lights will go out
and the brush in the floor noz-
zle will stop.
(2)
(1)
(5)
(15)
(11)
5. Lift the appliance by the han-
dle (2) and place it onto the
charging station (15) from
above.
6. Clean the appliance and the
floor nozzle if required, as
described in Chapter "Clean-
ing and maintenance" on
page EN-25.
7. Fully charge the rechargeable
battery where necessary.
Use Page EN-23
Werbung
