Privileg VC-SP1002D-3 Gebrauchsanleitung Seite 66

Page EN-28 Cleaning and maintenance
Cleaning the floor
nozzle
WARNING
Risk of short-circuit!
Moisture can lead to short
circuiting.
■ Never allow liquid to pen-
etrate the fl oor nozzle.
The electrical drive for the
rotating brushes can be
found within it. Clean the
fl oor nozzle when dry, at
most with a cloth that is
only very slightly damp.
CAUTION
Risk of injury!
Improper handling of the ap-
pliance may result in injury.
■ Pull the mains plug out of
the socket before cleaning
the appliance.
■ Remove
the
vacuum cleaner from the
handheld vacuum clean-
er holder before you clean
the fl oor nozzle in order to
avoid it switching on when
not required.
1. Remove the floor nozzle (10)
2. Remove hair and lint caught
nozzle is clogged, you can re-
move the brush for easier clean-
ing. See page EN-29.
handheld
(10)
from the handheld vacuum
cleaner holder (16) by press-
ing and holding the release
button (9) and pulling the noz-
zle downward.
in the rotating brush after
each use.
If the brush is very dirty or
the suction tube in the floor
(9)
(16)