Transportation And Storage - Anova Rlt14Pto Aufbauanleitung Und Benutzerhandbuch

- Test the wood splitter without load several times.
Recommended hydraulic oil: DIN ISO HLP 46
Functional test
Before each use, the following functional tests of the log splitter must be carried out:
- Let both shift handles and the splitting blade lower 5 cm above the table.
- A switching lever must always be released; The splitting blade will remain in the
selected position.

5.2. Transportation and storage

- Clean the product properly before storing it.
- Keep the product in a clean and dry place.
Attention
There may be oil leaks during transportation of the product. Secure the product properly and
take measures to protect the environment.
Transport
- Transport by forklift/pallet truck: The product is fixed to a pallet using straps for
transport.
Transport by crane: Circular loops on the casing will be used to transport the product
-
using a hook.
Never lift the product by the blade to split. Never transport the product in a horizontal
position (oil may spill).
Facility
The product has been designed for work on flat surfaces and must be installed and fixed using
M10x150 screws on a hard base so that it is sufficiently stable.
Goo
14
46
EN