Anova RLT14PTO Aufbauanleitung Und Benutzerhandbuch Seite 91

4.2.2. Instructions for use
1. First of all, the trunk must be fixed using a clamping device - chain and spring.
2. Secondly, pull the switching handle until the wedge falls and firmly touches the top
edge of the log.
Now release the shift lever and the knife will stop.
3. Release the chain spring-holding device and continue splitting the log.
4. During the splitting process, the wedge normally holds the trunk in the splitting position.
Downcut Limitation
Long pieces of wood: The cylinder extends a maximum of 100 cm (fig. 12).
Division rhythm
There are two rhythms of division.
- Move quickly in the direction of the wood by lightly pulling the operating levers.
- The splitting rate decreases and with the forward movement of the wedge maximum
performance is achieved by pressing completely down.
- Never split with the fast forward motion.
Registration Support - Protector
The support is to hold the log after the splitting process to prevent the wood from falling towards
the operator. (pic.3)
5. MAINTENANCE AND TRANSPORTATION
5.1. Maintenance
Only a regularly treated and maintained product can be a satisfactory help. Insufficient
maintenance and care can lead to unexpected accidents and injuries.
- Never use aggressive cleaning agents for cleaning. They could damage or destroy the
product.
- Unplug the product.
- Have any repair and maintenance of the electrical device carried out by electricians
only.
12
EN