Technical Specifications; Assembly And Operation - Anova Rlt14Pto Aufbauanleitung Und Benutzerhandbuch

3. TECHNICAL SPECIFICATIONS

Cutting force
Source feed
Power
Maximum cutting length (min-max.)
Maximum trunk Ø (min-max.)
Oil tank capacity
Hydraulic pressure
Forward movement speed (slow/fast)
Backward Movement Speed
Output shaft revolutions
Max. cylinder stroke
Noise pressure level (no load/load)
vibration level
Dimensions (HxWxD)
Weight

4. ASSEMBLY AND OPERATION

4.1. Unpacked
After unpacking the product, check the contents of the box:
Place the shipping box on a solid, flat surface.
−
− Carefully cut the shipping bands and remove the shipping box lid.
− Using two people to lift, carefully remove the product.
Verify that all breaker parts and accessories are in the box before beginning assembly.
−
Attention
Make sure it contains all the indicated material. Check that it has not been damaged in
transport.
Immediately inform the distributor or supplier of any damage or missing parts, since claims
filed with later dates will not be recognized.
Characteristics
9
14 tons
PTO output shaft (PTO)
35 HP – 26kW
555 - 1,000mm
80 - 450mm
10L
245 bar
0.056/0.297 m/s
0.068m/s
540 min -1
950mm
74.3dB/93.6dB
< 2.5 m/s2
1190 x 1040 x 2500mm
207kg
EN