Gardena PowerMax 1100/32 Betriebsanleitung Seite 10

To connect the mower [ Fig. O1 ]:
DANGER! Electric shock!
To avoid damage to the plug
must be inserted into the cable lock
v Before you operate insert the extension cable
lock (15) .
1. Connect the socket (12) of the extension cable
2. Loop the extension cable
pull tight.
3. Connect the extension cable
To start the mower [ Fig. O2 ]:
DANGER! Risk of injury!
Risk of injury if the product does not stop when you
release the start lever.
v Do not bypass the safety devices or switches. For example do
not attach the start lever
To start:
The product is fitted with a two­handed safety device (start lever
with safety interlock (16) ) to prevent the product from being turned
on by accident. Contact the GARDENA service if this is not garan­
teed.
1. Push the safety interlock (16)
with the other hand.
2. Release the safety interlock
The product will start.
To stop:
1. Release the start lever (17) .
To adjust the cutting height [ Fig. O3 / O4 ]:
DANGER! Risk of injury!
Cut injury when the front and rear axles are adjusted in
different height positions.
v Adjust the front and rear axles in the same height position.
v Adjust the front axle in the same height positon on both
sides.
The cutting height can be adjusted in 3 height positions (2 cm, 4 cm and
6 cm).
1. Lay the product on its side carefully.
2. Pull the front wheel axle (18)
3. Release the front wheel axle
Make sure that the front axle is fully released on both sides in the same
height position.
4. Pull the rear wheel axle (20)
5. Release the rear wheel axle
Make sure that the rear axle is fully released in the height adjust
opening.
To use the mower with the grass box [ Fig. O5 ]:
DANGER! Risk of injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, disconnect the product from the
mains and use gloves before you open the protective flap
v Do not put your hands in the discharge opening.
Do not use the product without grass box.
1. Lift the protective flap (22) .
(9)
2. Put the grass box into the product by the handle
Make sure that the grass box is securely connected.
3. Start the product.
4. Stop the product when the grass box
5. Lift the protective flap (22) .
(9)
6. Remove the grass box
7. Empty the grass box.
10
GAR_05031-20.960.04_2024-03-13.indd 10 GAR_05031-20.960.04_2024-03-13.indd 10
(14) the extension cable
(15) .
(13) into the cable
(13) to the plug (14)
(13) , insert the loop into the cable lock
(13) into a 230 V mains socket.
(17)
to the handle.
with one hand and pull the start lever
(16)
.
out of the current height adjust openings
(18) in the new height adjust openings
out of the current height adjust opening
(20)
in the new height adjust opening
(11)
.
(9)
is completely filled.
(11)
of the product by the handle .
Tips to use the mower:
If grass residue is left in the discharge opening, pull the mower backwards
about 1 m so that the grass residue can drop out downwards.
(13)
To produce a well-maintained lawn, we recommend to cut the lawn
regularly once a week if possible. The lawn becomes thicker if you cut it
frequently.
After relatively long cutting intervals (holiday lawn), first of all cut in one
direction with the highest cutting height and then cut in the crosswise
direction with the required cutting height.
.
If possible, only cut the grass when it is dry, if the grass is damp, the cut-
(15) and
ting pattern will be uneven.
4. MAINTENANCE
DANGER! Risk of injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, disconnect the product from the
mains and use gloves before you do maintenance.
To clean the product:
(17)
DANGER! Electric shock!
Risk of injury and risk of damage to the product.
v Do not clean the product with water or with a water jet
(17)
(in particular high­pressure water jet).
To clean the underside of the product [ Fig. M1 ]:
The underside is easiest to clean after you mowed.
Use gloves.
1. Lay the product on its side carefully.
2. Clean the underside, the blade and the airflow slots
(do not use sharp objects).
To clean the overside of the product and the grass box:
Do not clean with chemicals including petrol or solvents.
1. Clean the overside with a damp cloth.
2. Clean the airflow slots and the grass box with a soft brush
(do not use sharp objects).
5. STORAGE
To put into storage:
(19) .
(19) .
The product must be stored away from children.
1. Disconnect the product from the mains.
(21) .
2. Clean the product (see 4. MAINTENANCE).
(21)
.
3. To save space, release the wing nuts of the handles until the
joints can be folded together easily.
4. Stow the product in a dry, enclosed and secure place.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to normal household waste.
It must be disposed of in line with local environmental regulations.
IMPORTANT!
(22) .
v Dispose of the product through or via your municipal recycling
collection centre.
6. TROUBLESHOOTING
DANGER! Risk of injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, disconnect the product from the
mains and use gloves before you do troubleshooting.
(23) with a brush
13.03.24 15:26 13.03.24 15:26