Switching On/Off; Working Instructions; Cleaning And Care; Cleaning - Parkside Performance Paesp 20-Li A1 Bedienungsanleitung

Preselecting the vibration rate
Selecting the desired speed: Press
o
the speed control button
several times.
Vibration level Vibration rate (min
1 12,000
2 12,800
3 14,000
4 16,000
5 18,000
6 20,000
Switching on
Press the on/off switch
o
Switching off
Press the on/off switch
o
˜ Working instructions
CAUTION! Risk of injury and
m
damage to property!
Secure the workpiece with the
u
aid of clamping devices on the
workbench.
Always make sure that the
u
workplace is well ventilated.
Avoid over-stressing the product
u
while working.
Use appropriate sand grid
u
working different materials.
Switch the product on before
u
applying the product to the
workpiece.
Apply minimal pressure when
u
working.
Work at a constant speed.
u
Never use the same sand grid
u
for sanding different materials (e.g.
wood followed by metal). Optimum
sanding results can only be
achieved by using clean sand grid.
m
once or
8 ] [
u
)
–1
u
˜ Cleaning and care
m
.
[ 9 ]
again.
9 ] [
˜ Cleaning
NOTE
u
o
for
[ ]
o
o
Cleaning the product
o
o
[ ]
o
CAUTION! Risk of injury and
damage to property!
Guide the product over the
workpiece in parallel. Use
overlapping sanding motions.
After completing the task: Lift
the product from the workpiece.
Switch the product off.
WARNING! Risk of injury!
Always switch the product off,
remove the battery pack
and let the product cool
down before making any
adjustments.
Do not use chemical, alkaline,
abrasive or other aggressive
detergents or disinfectants to
clean this product as they might be
harmful to its surfaces.
Never allow fluids to get into the
product.
Always keep the product clean, dry
and free from oil or grease.
After each use and before storage:
Remove debris from the product.
Regular and proper cleaning helps to
ensure safe use and prolongs the life
of the product.
Clean the product with a dry cloth.
Use a soft brush for areas that are
hard to reach.
In particular, clean the air vents after
every use with a cloth and soft brush.
The vents must always be clear.
[ 5 ]
GB/IE 37