ausdom ANC1 Bedienungsanleitung Seite 4

4. Pairing with Wireless Devices
4-1 Pairing the Headphones with a Computer
Before pairing your headset with your computer, make sure
your computer or laptop has Bluetooth wireless capabilities
If not, you must purchase a Bluetooth
preferably 2.1 or higher
1 Make sure the headphone is off
2 Turn on wireless capability on the computer
3 The "Search new device" screen will be displayed
4 Do not place both devices more than 3ft/1m away from
each other
5 Press and hold the power button on the headphone until
it powers on but don't let go just yet Continue holding down
on the power button until you see the LED indicator flashes
blue and red alternately, which means your headphone is in
"pairing mode" waiting to be paired with your device You
will hear a prompt
6 As soon as the computer system detects the new device,
please se ect "AUSDOM ANCI" to pair Once successfully
paired, the LED flashes blue You will hear a prompt
4-2 Pairing the Headphone with a Phone
1 .Make sure the headphone is off.
2.Do not place both devices more than 3ft/1m away from
each other.
3.Press and hold the power button on the headphone until
it powers on but don't etgo just yet. Continue ho ding down
on the power button until you see the LED indicator flashes
blue and red alternately, which means your headphone is in
"pairing mode"waiting
will hear a prompt
to be paired with your device. You
EN-3
wireless dongle,