Silvercrest SPBT 5 A1 Bedienungs- Und Sicherheitshinweise Seite 12

z Connecting the product to a
BLUETOOTH
®
This product can be connected to external devices
(e.g. smartphones) via BLUETOOTH
Note: This product has a BLUETOOTH
function, however it is not possible to send a
BLUETOOTH sound with it: This means that you
®
can receive a BLUETOOTH
from an external source such as a smartphone.
Check if your record player is in BLUETOOTH
mode. If the record player is not yet in
BLUETOOTH mode then briefly press the MODE
®
button until BLUETOOTH
16
(the function LED
11
player starts to search for BLUETOOTH
(the function LED
11
pling).
In BLUETOOTH mode:
®
Your device is looking for BLUETOOTH
Switch on the BLUETOOTH
device (e.g. iPhone/iPad/Android/another
telephone/tablet/computer) and make sure
that the device is "recognisable".
Note: If necessary, check the manual for your de-
vice to see how to add or set up BLUETOOTH
Select "Add new device" if required.
Note: Some products automatically search for a
new device if the "Add new device" option is not
available.
When your device is found, it is displayed as
"SPBT 5 A1". Select it and start coupling.
"BLUETOOTH Connected" appears when coupling
®
is complete.
After your device is coupled with the record player,
they connect with each other when within range
(approx. 10 metres or less).
Your device remains coupled with the record player
until you decide to terminate the connection or to
"uncouple".
You can also press the PAIR button
the connection.
device
.
®
reception
®
-audio signal wirelessly
®
mode is activated
®
turns blue). The record
devices
®
flashes in blue during cou-
.
®
® connection on the
.
®
to restore
17
Playing when in BLUETOOTH
using an external device:
Press the PREV button
track on your BLUETOOTH
Press the NEXT button
on your BLUETOOTH
Press the PLAY / PAUSE button
on your BLUETOOTH
Use with USB playback:
® Connect a USB stick (not included in delivery))
to the USB port.
Insert the USB connector into the corresponding
USB port .
10
Audio content on the USB stick will be played auto-
matically.
z Digitalise/make recordings of
records
You can make recordings from a record, BLUETOOTH
and AUX IN on a USB stick (not included).
Connect the USB stick to the USB connection.
Insert the USB connector into the correspond-
ing USB port
Press the MODE button
mode (BLUETOOTH
from which a recording should be made on
the USB stick.
Press the REC button
function-LED
11
Press the REC button
z Replacing the stylus
Note: We recommend replacing the stylus
after approximately 250 hours of playback.
Removing the stylus:
Place a flat-head screwdriver on the tip of the
stylus . Carefully press the stylus
25
wards in the direction of the tonearm
Now remove the stylus
whilst also pressing down on it.
mode/
®
to play the previous
13
device.
®
to play the next track
14
device.
®
to play back
15
device.
®
.
10
to select the desired
16
, record player or AUX)
®
("Record") and the
12
flashes. Recording starts.
again to stop recording.
12
25
by pulling it forward
25
®
25
down-
.
7
GB 11