Simag SD 22 Bedienungsanleitung Seite 12

If-the iceeubes have not the correct•size, waitfot
Sebdndöhärvest Cbefore attempting
adjustmehfbY Settihä"thé c übesizecontrol".
By rotatingthe contröl-setting •screw clockwise
theice cube thicknesScan
contrarythethiCknesscan"beredueedby turning
the setting•screW counterclockwise,
IftheAce.cubes are, shallow and doudy, •it
possibleåhätthe ice mäkörtuns short df water
duihg; théfreézing cydé Second phase or; the
quälityof-th$uppliéd WäterrequireSthe use Of
an' apprOpiate Water*fitteroffdonditiöner.
J. With the icemaker in the harvest cycle, hold
ice against the bin thermostat control buEbto test
its shut off (Fig.4). This should cause the ice
makei to'shut OFF after 30 secorids, 1 minute at
th e mo st, name ly pettee c ohtrp
any
be increased; on the
l bulb tempera -
NOTE. In case this test is performed during
the freezing cycle, the unit will shut OFF only
at the end of the freeezing oyc/eand exactly
when the timer switch actuators dropoffinto
thé cam slot (Fig.5).
Withinminutes åftei, t h9.ice-i$ r emoved ftem•the
sensingbulb, thebulb willwarm upto reaeh.'+46C
and consequentlywili cause the icemakerto
restart from the harvest (defrost) cycle.
K. InstrUCt they-ownermser%on the generat
operation of the ice machine and åbbüe-the
cleaning and care it requires.
Page 5