Parkside PSSFS 3 A2 Bedienungs- Und Sicherheitshinweise Seite 16

In order to avoid electrical shock, use caution when working
with voltage above 32 V
Such voltage poses a shock hazard .
Always keep the product dry .
The RCD test result of the product is not guaranteed to be
correct .
The LED indicators of the product may light up weakly depend-
ing on the distributed capacitance of the electrical installation .
If a plug adaptor has to be used to test a shockproof socket or
a lead connection, ensure that this plug adaptor is in a perfect
condition and that the protective conductor connection of the
plug adaptor is continuously connected . Using plug adaptors
without continuous protective conductor leads to faulty test
results .
The product cannot detect an inversion of the neutral (N) and
the earth (PE) conductor .
16 GB/IE/NI
RMS, 42 V∼ peak or 60 V
~
.