VEVOR ROPE-S-105-32 Bedienungsanleitung Seite 5

lukewarm soapy water (ph neutral, 30 °C maximum), then rinse thoroughly with
fresh tap water.You can wash your rope in a washing machine. Choose the 30 °C
delicate synthetic setting, without spin cycle.Use only household face and body
soap. All other cleaning products, for example solvents, stain removers,
degreasers, etc. are too strong and are incompatible with nylon.Do not use a high
pressure water sprayer.
Remove your gear from packs after each activity, even if cleaning isn't necessary.
Let all your gear air-dry away from UV sources (ultraviolet rays). Avoid proximity
to heat sources such as direct sunlight, wood fires, or a radiator.
4）Additional Information
You must have a rescue plan and the means to rapidly implement it in case of
difficulties encountered while using this equipment.
- The anchor point for the system should preferably be located above the user's
position and should meet the requirements of the EN 795 standard (12 kN
minimum strength).
- In a fall-arrest system, it is essential to check the required clearance below the
user before each use, in order to avoid hitting the ground or an obstacle in case of
a fall. Avoid slack in the rope between the user and the anchor point.
- Make sure that the anchor point is correctly positioned, in order to limit the risk
and the length of a fall.
- A fall-arrest harness is the only device allowable for supporting the body in a
fall-arrest system.
- When using multiple items of equipment, a dangerous situation can arise in
which the safety function of an item of equipment can be affected by the safety
function of another item of equipment. WARNING: ensure that your products do
not rub against abrasive or sharp surfaces.
- Users must be medically fit for activities at height. WARNING: inert suspension
in a harness can result in serious injury or death.
- The Instructions for Use for each item of equipment used in conjunction with this
product must be followed.
- The Instructions for Use must be provided to the user of this equipment, in the
language of the country where the equipment is used.
- Make sure the markings on the product are legible.
4