Charging Times - Parkside Phsa 20-Li A1 Originalbetriebsanleitung

Sound power level (L
guaranteed ........................... 90 dB(A)
measured ........ 87 dB(A); K
Vibration (a ) .........................................
h
Rear handle.......1.28 m/s
Front handle ......1.72 m/s
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
* The actual runtime under load of a fully
charged battery depends on how you work
and on the load put on the trimmer during
operation.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The specifi ed total vibration value and the
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The specifi ed total vibration value and the
stated specifi ed noise emission value can
also be used for a provisional assessment
of the load.
Warning: The vibration and noise
emissions may deviate from the spe-

Charging times

(min.)
PLG 20 A1
PLG 20 A4
PLG 20 C1
PLG 20 A2
PLG 20 A3
PLG 20 C3
PDSLG 20 A1
Smart
PLGS 2012 A1
)
WA
= 2.53 dB
WA
, K=1.5 m/s
2
, K=1.5 m/s
2
PAP 20 A1
PAP 20 A2
PAP 20 B1
60
45
35
35
35
cifi ed values during actual use of the pow-
er tool, depending on how the power tool
is being used and, in particular, what kind
of material is being worked on.
Safety measures for the protection of the ope-
2
2 rator are to be determined that are based on
an estimate of the actual vibration load under
the real operating conditions (for this, all parts
of the operating cycle are to be taken into ac-
count, for example, times in which the power
tool is turned off, and those during which it is
turned on but running without a load).
Charging times
The device is part of the Parkside
X 20 V TEAM series and can be operated
using Parkside X 20 V TEAM series batteries.
Batteries of the Parkside X 20 V TEAM
series may only be charged using chargers
of the Parkside X 20 V TEAM series.
We recommend that you operate this appli-
ance with the following batteries only:
PAP 20 A1, PAP 20 A3, PAP 20 B1,
PAP 20 B3.
We recommend charging these batteries
with the following chargers:
PLG 20 A1, PLG 20 A3, PLG 20 C1,
PLG 20 C3, PDSLG 20A1.
An up-to-date list of battery compatibility
can be found at: www.lidl.de/akku
PAP 20 A3
PAP 20 B3
90 120
60 80
45 60
45 60
40 40
GB
Smart Smart
PAPS 204 A1 PAPS 208 A1
120
80
50
50
40
MT
210
165
120
120
50
23