INSTALLATION
SHADOW sound speakers must be installed using the flying accessories described in this manual and following the special
assembly instructions by qualified staff only, strictly complying with the current regulations and safety standards in force in the
country of installation.
FBT flying accessories
are manufactured
being used with any other speaker or device.
Any possible elements of the ceiling, floor or further supports where SHADOW systems are to be installed shall be able to
safely bear the load. The flying accessories in use are to be coupled and secured safely to both the sound speaker and the
ceiling (or the other support).
When components
are fitted to ceilings, floors or beams, always make sure that all couplers and fixing elements are properly
sized and have an adequate load capacity.
Besides the main suspension system, all flying speakers in theatres, indoor stadiums or in several other work and/or leisure
facilities shall be provided with an additional independent safety system with the adequate load capacity.
and chains with certified load capacity can be used as an additional safety device.
0 Hang SHADOW speakers using only original accessories
0 When choosing the place of installation, the suspension cable and the mounting supports make sure they are able to bear
speaker and flying accessories' weight with the proper safety factor
0As for fixed installations, always schedule and carry out special inspections on a regular basis in order to check all the parts
that have to guarantee system safety over time
0 Do not hang the system by the handles: handles have been designed for speaker transport, and are not suitable for its
suspension
0 Never lean on/hang from the flying speaker
for their exclusive use with SHADOW systems and have not been designed for
10
10
Only steel cables